help bracket questions

[sundowner1989]

ok i have an 83 mazda b2000 it is a coil truck my question it whick front bag brackets should i use i though since it was a coil truck i would use cups but i have heard that it would better to use torsion bar brackets ?

[wt5150]

i dont see why cups wont work. see if the coils are the same dia as a s10 spring. if so id use cups. not the cheap-o ones but the ones you bolt in place. keep that bag in place., i can make you a set, im located in tn , pm me if your intrested

[draggincaddy]

im 99% sure that no bag will fit in the spring pocket ( sleeves dont count :) ) further more im pretty sure theres no room for a bag until u cut it out and space the bag back into the frame ( they sit to close to the spindle)
cutting the front pocket out and goin with a torision bar type mount is your best bet.

[draggincaddy]

one a buddy of mine did
of course you dont have to have custom one-off arms....and this isnt gusseted, just mock up


after the cut


stock
as you can see very small pocket and far too low mounted to lay on any kind of large wheel